亚洲精品久久久无码一区二区

出现报警代码是力士乐驱动器维护人员常面临的一个问题。如果不注意它会耽误整个车间的生产、甚至引起其他不必要的问题。

F219 Motor Overtemperature Shutdown电机过热停机。It applies:temperature warning threshold < temperture error threshold。它适用于：温度警告阈值<温度误差阈值。亚洲精品久久久无码一区二区专业从事各品牌伺服驱动器维修,伺服电机维修。

顿别蝉肠谤颈辫迟颈辞苍:说明：

Motor temperature has risen to an unacceptable level. As soon as temperature threshold (155°C) is exceeded, the drive will immediately be brought to a standstill as set in the error reaction (P-0-0119, best possible standstill)电机温度已升至不可接受的水平。一旦超过温度阈值（155°C），驱动器将立即按照错误反应（P-0-0119，尽可能静止）

颁补耻蝉别:原因：

1. The motor was overloaded. The effective torque demanded from the motor was above its allowable continuous torque level  for too long.

电动机过载。要求的有效扭矩来自电机的扭矩高于其允许的连续扭矩水平时间太长了。

2. Break in line, ground short or short circuit in the motor  temperature monitor line

线路断路、接地短路或电机温度监测器线路短路。

3. Instability in the velocity loop.

速度环的不稳定性.

搁别尘别诲测:补救方法：

1. Check the installation of the motor. If the system has been in operation for a long time, check to see if the the operating conditions have changed. (in regards to pollution, friction, moved components, etc.)

检查电机的安装情况。如果系统已运行很长时间，请检查操作条件发生了变化。（对于污染、摩擦、移动部件等）

2. Check wires and cables to the motor temperature monitor for wire breaks, earth short and short circuits.

检查电机温度监测器的电线和电缆是否断线、接地短路和短路。

3. Check velocity loop parameters.

检查速度回路参数。

友情提示：请勿自行拆卸检查或交给非专业人士，以免越修越坏,造成不必要的经济损失！早一天联系，少一天损失！亚洲精品久久久无码一区二区  因为专注，所以专业！